Ford has launched a major recall campaign involving over 13,000 vehicles from its popular Ranger and Everest lineups due to a critical engine flaw. The affected models are equipped with the 3.0-litre V6 turbo-diesel engine, and were manufactured between 2022 and 2025. This issue could potentially lead to sudden engine shutdowns while driving, posing a serious safety hazard.
Let’s break down what this recall means for vehicle owners, how to check if your vehicle is impacted, and what steps to take if it is.
🛑 What’s the Issue?
According to Ford and official recall databases, a manufacturing defect in the left-hand camshaft sprocket of the engine is to blame. This defect can cause the sprocket to crack or fracture during normal driving conditions, leading to immediate engine stalling.
Losing power without warning while on the road significantly increases the risk of accidents — especially on highways or in high-speed traffic zones. Ford has acknowledged the severity of the defect and stated that it is actively addressing the issue to ensure customer safety.
🔧 Which Models Are Affected?
The recall affects a specific set of Ford Ranger and Ford Everest vehicles:
- Models: Ford Ranger and Ford Everest
- Engine Type: 3.0-litre V6 turbo-diesel
- Production Years: 2022, 2023, 2024, and 2025
- Total Affected Units: Approximately 13,490
If you own a Ford Ranger or Everest from the specified model years, it’s strongly advised to verify your vehicle’s status through Ford’s recall lookup.
⚠️ Safety Risks Explained
The camshaft sprocket plays a critical role in synchronizing the engine’s internal components. A fracture in this part can disrupt engine timing, causing immediate stalling without warning.
Some of the potential risks include:
- Sudden loss of power steering
- Increased stopping distance
- Dangerous situations in high-speed traffic
- Higher chances of rear-end collisions if the vehicle stalls without brake lights or warning
This type of issue is considered high-risk and should not be ignored under any circumstance.
🛠️ What Is Ford Doing About It?
Ford has initiated a voluntary recall and is reaching out to affected customers via email, phone, and physical mail notices. Authorized Ford service centers will inspect and, if needed, replace the camshaft sprocket free of charge.
Here’s what the process looks like:
- Contact or receive notification from Ford.
- Schedule an inspection with an authorized Ford dealer.
- If needed, the sprocket and associated components will be replaced at no cost.
- Affected vehicles may also receive software updates or mechanical inspections during the same visit.
🔍 How to Check If Your Vehicle Is Affected
To find out whether your vehicle is part of the recall:
- Visit the official Ford Recall Information Page or your local country’s Ford website.
- Enter your VIN (Vehicle Identification Number). This is typically located on your dashboard, insurance documents, or vehicle registration.
- The system will display whether your vehicle has active recalls and what actions to take.
Alternatively, you can contact Ford customer support:
- Australia: Call 13 FORD (13 3673)
- New Zealand: Dial 0800 FORD NZ (0800 367 369)
⏰ Why Immediate Action Is Important
While no serious injuries or accidents have been publicly reported in connection with this recall yet, the potential for harm is significant. Ignoring a recall notice can result in:
- Complete engine failure
- Costly damage to the vehicle if the issue worsens
- Risk of personal injury to you and others on the road
If your vehicle is among those impacted, don’t delay repairs — getting it checked could save lives.
📰 What Ford Owners Are Saying
The issue has sparked discussions on forums like Reddit and platforms like CarExpert, 9News, and International Business Times UK. Many Ford customers have expressed concerns, especially those using their Rangers or Everests for long-distance travel, towing, or commercial purposes.
Some users are questioning the long-term reliability of Ford’s V6 engine line, especially in newer models. However, others are praising the company’s proactive response and transparency in dealing with the issue.
🛡️ Ford’s Commitment to Safety
Ford has emphasized that customer safety is its top priority. The brand is known for acting swiftly in such matters and aims to minimize inconvenience while resolving safety defects efficiently. In addition to this recall, Ford continues to monitor global vehicle performance and may issue additional service updates or recalls as necessary.
📝 Final Thoughts
If you own a Ford Ranger or Everest manufactured between 2022 and 2025, especially one with the 3.0-litre V6 turbo-diesel engine, this recall affects you. Check your VIN, book an inspection, and get any necessary parts replaced as soon as possible.
Safety recalls are not something to postpone — they can make the difference between a close call and a tragedy.
❓ FAQs
What is the issue with the Ford Ranger and Everest engines?
The defect involves the camshaft sprocket in the V6 turbo-diesel engine, which may crack and cause the engine to stall suddenly.
Which Ford models are affected by this recall?
The recall affects 2022 to 2025 Ford Ranger and Everest vehicles with the 3.0-litre V6 turbo-diesel engine.
How many vehicles are being recalled?
Approximately 13,490 units of Ford Ranger and Everest are part of this recall.
What are the safety risks involved?
A fractured camshaft sprocket can cause the engine to stall unexpectedly, leading to increased risk of crashes.
How can I check if my Ford vehicle is affected?
Use your VIN on the Ford Recall Information page or call Ford customer service to check.
Is the repair free of cost?
Yes, authorized Ford dealers will inspect and replace the faulty parts at no charge.
Can I still drive my vehicle if it’s part of the recall?
It’s advised to avoid driving until it’s inspected, especially if you notice unusual engine behavior or warning lights.
How long does the repair take?
The repair duration may vary, but most inspections and replacements are completed within a few hours at authorized service centers.
